Low pressure pump 380V

Low pressure pump 380V - 7.5HP

Product code: DPVN.T3075

Status: Stocking

Price: Liên hệ

Specifications

Voltage used: 380V (3 phase).
Power: 7.5HP – 5.5Kw.
Exhaust pipe size: 90mm.
Pump water flow: 85m3/h.
Pressure head (push height): 15m.
Included cord: 10m.

How to install a 3-phase low-pressure submersible pump

When using, place the pump from the bottom of the well: from 0.3m to 0.5m (for domestic water pumps).
Only use 3-phase submersible pumps with grid voltage from 340V-380V.
The power transmission line must be large enough: 2mm or more.
After each pump you want to use again, you must stop for 10-15 minutes to let the water in the return tube drain.
Do not immerse the top end of the tube in the water tank to avoid all the water returning when the machine is stopped.
Place the top of the pipe high so that trash and rocks do not get sucked into the pipe and jam the pump impeller.
Carefully check the voltage of the phases before energizing to avoid phase loss, which can easily cause damage.
When used, it should be placed horizontally so that gravity is evenly distributed on the two bearings (upper and lower bearings).
With a drilled well water pump, only start the machine when placing it in a well with water.

Safety notes when using:

Do not use submersible pumps to dredge wells.
Do not come into contact with water where the pump is operating.

Application of 3-phase low-head submersible pump
With a closed production process and constant technical improvements, DAPHOVINA brand low pressure single-phase submersible pumps are effective solutions for a variety of needs such as:

Civil and production activities such as: Biogas suction pumps, field water pumps, pond drains, aquaculture pond drains; Anti-flood pumps for basements and warehouses.
Industrial production activities: large-flow clean water pumps, pumps used in fuel exploitation industry (coal, stone and mineral mines).

Products can be customized for use in specialized purposes and environments: